Do you own a business that requires you to print carbonless invoices? If you don’t have the foggiest idea about how to glue carbonless paper, this article will give you an idea of what things to do. Keep on reading to learn how to glue carbonless paper with ease and save yourself from the stress of not being able to deal with it appropriately.
The cold way
The first method is simple. Take a liquid adhesive (such as Alene’s Tacky Glue or Elmer’s Glue-All), and apply it to one sheet of paper. When you stack that sheet on top of another sheet, press together lightly for about 15 seconds with your fingers.
Allow everything to settle down, and then peel off your sandwich. The second layer will stick very well (you should not need a lot of pressure), and there shouldn’t be any evidence of the cold-glue application on either piece of paper.
The hot way
Apply a very hot iron onto each corner. If that is too much for you, let it sit under a heat lamp for about an hour. The heat will make your sheets stick together and allow them to be handled without leaving any visible residue on your hands.
Even after being used numerous times, these laminating sheets will not lose their quality as long as they are stored properly in a cool and dry place away from direct sunlight or moisture. Store in a box between uses (if possible) since air can cause these laminating sheets to stick together. This method works best with standard NCR paper.
By Hand
To layout, a print document with carbonless copies, start by placing your original on a table with its back facing up. Layout your NCR paper in front of you with its face down and make sure it is aligned left-to-right and top-to-bottom.
Place your original on top of the NCR paper and align one side of its edge along the closest line. Then, starting from that first line, slide it into place so that each edge matches up with a corresponding column on your NCR.
Once you have reached both sides, straighten out any crooked lines. You can then cut off any excess NCR around each page using scissors or letter openers/blades but be careful not to snip any pages accidentally!
Frequently Asked Questions
How do you use carbonless paper?
Carbonless, or NCR (no carbon required), the paper contains chemicals that react with one another when they come into contact. They generate a small amount of heat. What results is an interference bond (i.e., heat) that glues your papers together in seconds.
To get started: Purchase a pack of NCR forms and have it on hand in your office; if you write any long, multipage documents, it will save you time and effort by eliminating many trips to your printer.
What is the difference between carbon paper and carbonless paper?
Carbon paper and carbonless copy paper are both used in various businesses and homes. While they both provide copies of printed material, their use differs significantly. Carbon paper is thin and coated with colored ink, which creates an impression when used with a ballpoint pen or typewriter.
Carbonless copy papers consist of single-sided pages that contain a watermark pattern; these papers are also known as NCR papers. To get high-quality copies from either of these types of paper, it’s important to understand how they work and how you can use them best for your needs.
What is padding glue?
Padding is used on documents that require multiple copies of a form. Padding is usually white and made of cotton or linen fibers.
The purpose of padding is twofold: First, it provides space between pages so that carbon copies can be easily pulled off after being duplicated.
Second, padding prevents ink from seeping through and makes printing smudged or illegible. Applying padding depends upon whether or not you are using continuous-form or booklet-form carbonless paper.
How do you use NCR glue?
First of all, when working with NCR forms, you will always want to apply a liberal amount of NCR adhesive on both sides of your form. A thinner layer may not be as strong as a thicker layer and can risk separation or loss.
You also want to make sure that you never put too much pressure on top of your glued form while it is drying because it can create lumps in your final product, which may cause other sheets in your stack to not feed correctly during printing.
Lastly, if you are working with more than one sheet at a time, make sure that you wait until one side has dried before applying glue to another sheet so that they do not stick together.
Final Words
Carbonless paper is a special kind of ledger or form that requires wetting with an alcohol solution before printing. If you are confused about what I’m talking about, check out our video on Colored Print and click around our website for more information. While most ledger forms are acceptable for use with inkjet printers, many laser printers will have issues when attempting to print on them. To avoid trouble in that area, it’s usually better to opt for a stock explicitly designed for laser printers if your printer allows such options. And if you ever run into difficulty getting your laser printer to recognize carbonless stock, you should always consult with tech support first!